Vibrational predissociation of H5 +

The full nine-dimensional vibrational Hamiltonian for H5 + described in the literature [Kraemer et al., J. Mol. Spectrosc. 164, 500 (1994)] is adopted here for an approximate evaluation of the spectral linewidths of the observed H-H stretching modes of the H5 + ion and the corresponding modes of its D5 + isotopomer. In this approximation the high dimensionality of the original Hamiltonian is reduced to a three-dimensional model Hamiltonian which takes only the H-H stretching modes and the molecular dissociation mode into consideration assuming that they are adiabatically separable from the remaining modes. To make the calculations numerically feasible, the molecular degenerate ("skeletal") vibrations are assumed to take place in harmonic potentials, and the effect of the internal propeller rotation is completely disregarded. The linewidths calculated in this approximation are too small to explain the broad shapes of the observed spectral transitions. It can thus be argued that the failure to resolve rotational structure in the observed bands is mainly due to spectral congestion and only partly due to predissociation of the H5 + cluster.     

Magnetic interactions in a series of paramagnetic Ln(III) complexes with a chelated imino nitroxide radical

The magnetic interactions in a new series of isostructural imino nitroxide radical lanthanide(III) complexes, [Ln(hfac)₃(IM2py)] (Ln = Gd–Yb: IM2py = 2-(2′-pyridyl)-4,5-dihydro-4,4,5,5-tetramethyl-1H-imidazoline-1-oxy; hfac = 1,1,1,5,5,5-hexafluoro-2,4-pentanedione), are examined by considering the intrinsic paramagnetic contribution of the Ln(III) ion from the corresponding [Ln(hfac)₃(pybzim)] with a diamagnetic pybzim(2-(2-pyridyl)benzimidazole) ligand; the Ln(III)–IM2py interaction being antiferromagnetic for the 4f⁷ to 4f¹³ Ln(III) complexes and negligibly small for the other complexes. This series is the first example reverse to the previous cases for the series of Ln–Cu or Ln–aminoxyl(NIT) radical (4,5-dihydro-4,4,5,5-tetramethyl-1H-imidazoline-3-oxide-1-oxy) complexes, other than only a few examples of semiquinone Ln complexes. This reverse nature of the magnetic interaction, as compared with the NIT complexes, validates the empirical approach by O. Kahn et al. [Inorg. Chem. 38 (1999) 3692; J. Am. Chem. Soc. 122 (2000) 3413] in the spin-coupled systems for a series of Ln(III) complexes.     

Mixing parameters for geometry optimization using the Hamiltonian algorithm

We study the mixing parameters for the search of an optimal geometry using the Hamiltonian algorithm (HA) combined with ab initio molecular orbital calculations. We choose the C?CC?CC?CC dihedral angle of the butane molecule as an example. HF/3-21G level calculations are employed as the molecular orbital calculations. The distributions of the eigenvalues of mixing coefficients are fitted with the linear, quadratic, and quartic functions. Analyses of HA calculations both up to 2,000 and 60,000 iterative calculations show a possibility that the mixing process reduces the number of iterations. The low energy HF/3-21G, B3LYP/6-31G**, and PCM B3LYP/aug-cc-pVDZ optimized structures of the N-acetyl l-histidine N??-methyl amide and four water molecule supermolecule were also determined using the HA optimization method and compared to the recently determined thought to be global minimum energy structure.     

SmI2-mediated reduction of gamma,gamma-difluoro-alpha,beta-enoates with application to the synthesis of functionalized (Z)-fluoroalkene-type dipeptide isosteres

A samarium diiodide (SmI(2))-mediated reduction of gamma,gamma-difluoro-alpha,beta-enoates (15, 29, and 34) was successfully applied to the synthesis of (Z)-fluoroalkene dipeptide isosteres (23, 30, and 35), which have served as potential dipeptide mimetics. Reduction of the gamma,gamma-difluoro-alpha,beta-enoates by SmI(2) proceeded via successive two-electron transfers to form dienolate species which upon kinetically controlled trapping with t-BuOH yielded Xaa-Gly-type fluoroalkene isosteres exemplified by 23, 30, and 35. Replacement of the t-BuOH kinetic trapping agent with aldehydes or ketones provided access to alpha-substituted fluoroalkene isosteres (43 and 45) through aldol reactions of Sm-dienolates with the carbonyl compounds. Of particular note, the use of the SmI(2)-HCHO reagent system with chiral enoate 34 provided D-Phe-psi[(Z)-CF[double bond]CH]-D/L-Ser isosteres (45), which could be converted to enantiomerically pure isosteres (49-52) that bore a variety of side chain functionalities at the alpha-position. This was achieved by a sequence of manipulations consisting of beta-lactone formation followed by chromatographic separation and ring-opening with soft nucleophiles. Included in the present work is the first utilization of a Rh-catalyzed Reformatsky reaction of chiral imines for the stereoselective preparation of alpha,alpha-difluoro-beta-amino acid derivatives (28 and 33). The appropriate choice of reagents (carbonyl compounds for kinetic trapping or ring-opening nucleophiles and imines for Reformatsky reactions) allows the presented methodology to yield various fluoroalkene isosteres possessing a wide range of side chain functionalities.     

Cobalt(III) complexes of monodentate N9-bound adeninate (ade-), [Co(ade-kappaN9)Cl(en)2]+ (en = 1,2-diaminoethane): syntheses, crystal structures, and protonation behaviors of the geometrical isomers

In acidic aqueous solution, a cobalt(III) complex containing monodentate N(9)-bound adeninate (ade(-)), cis-[Co(ade-kappaN(9))Cl(en)(2)]Cl (cis-[1]Cl), underwent protonation to the adeninate moiety without geometrical isomerization or decomposition of the Co(III) coordination sphere, and complexes of cis-[CoCl(Hade)(en)(2)]Cl(2) (cis-[2]Cl(2)) and cis-[Co(H(2)ade)Cl(en)(2)]Cl(3) (cis-[3]Cl(3)) could be isolated. The pK(a) values of the Hade and H(2)ade(+) complexes are 6.03(1) and 2.53(12), respectively, at 20 degrees C in 0.1 M aqueous NaCl. The single-crystal X-ray analyses of cis-[2]Cl(2).0.5H(2)O and cis-[3]Cl(2)(BF(4)).H(2)O revealed that protonation took place first at the adeninate N(7) and then at the N(1) atoms to form adenine tautomer (7H-Hade-kappaN(9)) and cationic adeninium (1H,7H-H(2)ade(+)-kappaN(9)) complexes, respectively. On the other hand, addition of NaOH to an aqueous solution of cis-[1]Cl afforded a mixture of geometrical isomers of the hydroxo-adeninato complex, cis- and trans-[Co(ade-kappaN(9))(OH)(en)(2)](+). The trans-isomer of chloro-adeninato complex trans-[Co(ade-kappaN(9))Cl(en)(2)]BF(4) (trans-[1]BF(4)) was synthesized by a reaction of cis-[2](BF(4))(2) and sodium methoxide in methanol. This isomer in acidic aqueous solution was also stable toward isomerization, affording the corresponding adenine tautomer and adeninium complexes (pK(a) = 5.21(1) and 2.48(9), respectively, at 20 degrees C in 0.1 M aqueous NaCl). The protonated product of trans-[Co(7H-Hade-kappaN(9))Cl(en)(2)](BF(4))(2).H(2)O (trans-[2](BF(4))(2).H(2)O) could also be characterized by X-ray analysis. Furthermore, the hydrogen-bonding interactions of the adeninate/adenine tautomer complexes cis-[1]BF(4), cis-[2](BF(4))(2), and trans-[2](BF(4))(2) with 1-cyclohexyluracil in acetonitrile-d(3) were investigated by (1)H NMR spectroscopy. The crystal structure of trans-[Co(ade)(H(2)O)(en)(2)]HPO(4).3H(2)O, which was obtained by a reaction of trans-[Co(ade)(OH)(en)(2)]BF(4) and NaH(2)PO(4), was also determined.     

Synthesis of poly (ether-sulfone-amide)s by palladium-catalyzed polycondensation of aromatic dibromides containing ether sulfone structure,aromatic diamines,and carbon monoxide

A general method for the preparation of aromatic poly (ether-sulfone-amide)s has been developed. Polymerization is based on the palladium-catalyzed polycondensation of aromatic dibromides containing ether sulfone structural units, aromatic diamines, and carbon monoxide. Reactions were carried out in N, N-dimethylacetamide (DMAc) in the presence of palladium catalyst, triphenylphosphine, and 1,8-diazabicyclo [5,4,0]–7–undecene (DBU), and gave a series of poly (ether-sulfone-amide)s with inherent viscosities up to 0.86 dL/g under mild conditions. The polymers were quite soluble in strong acids, dipolar aprotic solvents, and pyridine. Thermogravimetry of the polymers showed excellent thermal stability, indicating that 10% weight losses of the polymers were observed in the range above 470°C in air. The glass transition temperatures of the polymers were around 230°C, which are higher than those of poly (ether-sulfone) analogues. These polymers also showed the good tensile strengths and tensile modulus. © 1994 John Wiley & Sons, Inc.     

Determination of ammonium ion in a flow-injection system with a gas-diffusion membrane : Selection of Optimal Conditions for the pH Indicator

The spectrophotometric determination of ammonium ion in water by flow-injection analysis with a membrane-separator and a pH indicator for detection is studied in detail. The relations derived facilitate the selection of appropriate solution compositions or the prediction of sensitivity. It is shown that 1.5×10^?5 M bromocresol purple (pH 6.8) as acceptor solution gives the maximal sensitivity in the flow system with a laboratory-made separation unit. Application of ultrasonic radiation in the separation step and the use of different flow rates for the donor and acceptor streams may result in increased permeation of ammonia and a correspondingly high sensitivity. By modifying the acceptor solution so that the sensitivity is decreased, more concentrated samples such as urine can be analyzed by direct injection without prior dilution. In this procedure, the sample rate was 60 h^?1 for ammonium concentration of more than 10^?5 M and 30–40 h^?1 for concentrations in the range 3×10^?7?10^?5 M. The detection limit was about 3×10^?7 M.     

Redoxable nanosheet crystallites of MnO2 derived via delamination of a layered manganese oxide

This paper reports on the swelling and exfoliation behavior of a layered protonic manganese oxide, H(0.13)MnO(2).0.7H(2)O, in a solution of tetrabutylammonium (TBA) hydroxide and the formation and characterizations of unilamellar two-dimensional crystallites of MnO(2). At low doses of TBA ions, layered manganese oxide was observed to undergo normal intercalation, yielding a TBA intercalated phase with a gallery height of 1.25 nm. With a large excess of TBA ions, osmotic swelling occurred, giving rise to a very large intersheet separation of 3.5-7 nm. In an intermediate TBA concentration range, the sample exhibited a broad X-ray diffraction profile with superimposed diffraction features due to intercalation and osmotic swelling. The component responsible for the broad profile was isolated by centrifuging the mixture twice at different speeds, and the recovered colloid was identified as a pile of MnO(2) nanosheets, corresponding to the individual host layer of the precursor layered manganese oxide. Observations by transmission electron microscopy and atomic force microscopy revealed high two-dimensional anisotropy with a lateral dimension of submicrometers and a thickness of approximately 0.8 nm. The nanosheet exhibited broad optical absorption with a peak at 374 nm (epsilon = 1.13 x 10(4) mol(-1) dm(3) cm(-1)). The restacking process of the colloidal MnO(2) nanosheets was followed by aging the colloid at a relative humidity of 95%. The broad diffraction pattern due to the exfoliated sheets weakened with time and eventually resolved into two sharp distinct profiles attributable to a TBA intercalation compound with an intersheet spacing of 1.72 nm and an osmotically swollen hydrate with >10 nm at a very early stage. As drying progressed, the former phase became more abundant without a change in interlayer distance, while the degree of swelling of the latter phase gradually decreased to 2.7 nm that remained unchanged on further aging. Subsequent drying at a lower humidity collapsed the 2.7 nm phase. The resulting single 1.72 nm phase was dehydrated by heating at 150 degrees C to produce a phase with a contracted interlayer spacing of 1.3 nm.     

Nitrogen atom insertion into Ir-S and C-S bonds initiated by photolysis of iridium(III)-azido-dithiocarbamato complexes

Photolysis of acetonitrile solutions of Cp*Ir(R2dtc)(N3) [Cp* = eta5-C5Me5, R2dtc = S2CNR2; R = Me (1) or Et (1')] at temperatures below 0 degrees C afford five-coordinate complexes Cp*Ir{NSC(NR2)S} (2 or 2'), where a nitrogen atom has been inserted into one of the Ir-S bonds. In solution, complex 2 thermally convert to the azaethene-1,2-dithiolate complex, Cp*Ir[SN=C(NMe2)S] (3), which could be crystallized as the corresponding dimer, {Cp*Ir[mu-SN=C(NMe2)S-kappa3S:S,S']}2 (4). As a result, a nitrogen atom that originated in the azide ligand is transferred into a C-S bond of the dithiocarbamate.     

Environment-dependent ultrafast photoisomerization dynamics in azo dye

Azoaromatic dyes have been extensively investigated over the past decade due to their potential use in a variety of optical devices that exploit their ultrafast photoisomerization processes. Among the azoaromatic dyes, Disperse Red 19 is a commercially available azobenzene nonlinear optical chromophore with a relatively high ground-state dipole moment. In the present study, we used ultrafast time-resolved spectroscopy to clarify the dynamics of a push-pull substituted azobenzene dye. Solution and film samples exhibited different ultrafast dynamics, indicating that the molecular environment affects the photoisomerization dynamics of the dye.